Accessibility

Font Size

100% 150% 200%

Background Colour

Default Contrast
Close Reset

Scheduled Maintenance


Please be advised that this website will undergo scheduled maintenance on the following dates: •

Tuesday 3rd December 11:00-15:00

During these times, some services may be temporarily unavailable. We apologise for any inconvenience this may cause.

 

 

 

Hillside Distillery, Maltings

Filter

No Available Filters

Save Search

Log in to save your search
Preview Category Catalogue Number Collection Title Date Level
Photographs and Off-line Digital Images C 70758 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Interior view from NE of hot malt bins, situated at top level of E end of Steep Room (above Drum Room) 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70759 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Steep Room: interior general view from E showing 24 cylindrical steel steeps (Nos. 1 and 2 in foreground), each with conical bases. The view also shows conveying equipment and water pipes above, and each steep feeds into drums below. The steeps were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company) 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70760 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Steep Room: interior view from E showing 24 cylindrical steel steeps (Nos. 1 and 2 in foreground), each with conical bases. The view also shows conveying equipment and water pipes above, and each steep feeds into drums below. The steeps were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company) 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70761 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Steep Room: interior oblique view from SE of steeps. The view also shows conveying equipment and water pipes above, and each steep feeds through a conical base into drums below. The steeps were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company) 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70762 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Steep Room: interior view from E into Steep No.1, showing recently steeped barley, and odd-numbered steeping vessels in background 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70763 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Steep Room: detailed view of Steep No.7, the foam indicating that pressurised aeration is in progress 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70764 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Drum Room: general interior view E down centre of Drum Room, showing conical bases of 24 steeps above, and 24 rotating maltings drums (with rim gears) below. Also visible at this level are electrical control panels on either side 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70765 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Drum Room: general interior view E down centre of Drum Room, showing conical bases of 24 steeps above, and 24 rotating maltings drums (with rim gears) below. Also visible at this level are electrical control panels on either side 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70766 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Drum Room: interior view from E down S side of Drum Room, showing electrical control panels (left), conical bases of steeps (above), and rotating drums below 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70767 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Drum Room: general interior view from ESE of odd-numbered rotating maltings drums 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70768 CN Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Drum Room: general interior view from ESE of odd-numbered rotating maltings drums 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70769 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Drum Room: view from E along gantry at middle level of S side of Drum Room 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70770 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Kilns: view from W looking into Kiln No.4, showing its wire-mesh floor in tilted position, allowing dried malt to fall into conveyors below 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70771 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Kilns: view from W looking into empty Kiln No.3, showing explosed steel mesh floors, the two halves of which tip downwards at the centre to allow the emptying of the kiln (see C77070) 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70772 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Kilns: view from N at level beneath kiln floors, showing access doors to Kilns 2 and 3 (left), and the base of the malt bins (right). The kilns are fired by oil burners directly, but two have a steam-heated indirect heat facility 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70756 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Drum Room: view from E at lower level down centre of Drum Room between the two rows of 12 rim-gear-driven maltings drums, also showing Crofts (Engineers) of Bradford gear boxes. The Drums were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company) 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70757 CN Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Drum Room: view from East at lower level down centre of Drum Room between the two rows of 12 rim-gear-driven maltings drums, also showing Crofts (Engineers) of Bradford gear boxes. The Drums were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company). 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70773 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Drum Room: view from E at lower level down S side of Drum Room showing roller bearings 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70774 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Drum Room: detailed view from NE of Drum No.1 (of 24), showing rim gear, Crofts (Engineers) of Bradford gearboxes, and roller bearings. The drums were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company) 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70775 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Console Room: view from SE of main control panel, with barley lorry outside (backround) waiting to unload. The Console Room is situated at the ground floor level of the adjacent Silo Block (to the SW), and the control panel was manufactured by 'Electric Construction' 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70776 CN Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Console Room: view from SE of main control panel, with barley lorry outside (backround) waiting to unload. The Console Room is situated at the ground floor level of the adjacent Silo Block (to the SW), and the control panel was manufactured by 'Electric Construction' 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70777 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Kilns: Detail of portable 'Redler Bulk Thrower', made by Redler Conveyors Ltd, Dunbridge Works, Stroud, Gloucestershire. It is used to load the kilns with malt from the malting drums 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70778 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Kilns: detail of Hamworthy (of Poole, Dorset) oil burner heating Kiln No.2 (which burns heavy fuel oil) 7/3/1996 Item Level
Photographs and Off-line Digital Images C 70779 Records of the Royal Commission on the Ancient and Historical Monuments of Scotland (RCAHMS), Edinbu Kilns: detail of supplementary peat-burning firebox of Kiln No.2 7/3/1996 Item Level