Accessibility

Font Size

100% 150% 200%

Background Colour

Default Contrast
Close Reset

Field Visit

Date 6 December 2023

Event ID 1170059

Category Recording

Type Field Visit

Permalink http://canmore.org.uk/event/1170059

What little remains of this Engine House, which is overgrown by brambles, ivy and trees, is situated 22m NE of the building platform that supported the magazine (NT18SE 24.3) of the Downing Point Battery and 13.5m W of the path leading to the sandstone steps (NT18SE 24.113) on the N face of the crag. Although the superstructure of the building has been demolished and the floor is not visible due to the dumping of soil and the vegetation, three rectangular plinths that may have been associated with the building are still visible. The most westerly (NT 15807 82482), measuring 1.7m from E to W by 0.8m transversely and at least 0.23m in height, is distinguished in having a broad central gutter running the full length of its upper surface. Three upright bolts at the edge of each side were provided to attach an engine. A second plinth (NT 15810 82483), which is situated 1.7m to the E, measures 1.1m from NE to SW by 0.95m transversely and at least 0.1m in height. This has a smooth, featureless upper surface and may possibly have been a threshold, although it is not certain that it lay outside the building. The third plinth (NT 15810 82476), which is situated 4.2m SE of the first, measures 3.2m from N to S by 1.05m transversely and at least 0.25m in height. It has a vertical slot 0.2m in length and 0.08m in breadth cut into its E edge, but is otherwise featureless. This appears to have lain outside the building.

The Engine House is shown on Barclay and Morris’ plan of the battery (Barclay and Morris 2019, 103 fig. 9.32) based upon maps dating from 1915-16 held by the National Archives at Kew (WO 78/5165). This indicates that the building was square on plan and was attached to an accommodation block situated on the NNE that contained cooking and dining facilities (NT18SE 24.23). The 1916 map (WO 78/4396), which does not distinguish between these elements, suggests that the Engine House was more rectangular than square on plan. It also shows three circular features just outside the SSW wall.

Visited by HES Archaeological Survey (A T Welfare, J. M. Hepher), 6 December 2023

People and Organisations

Digital Images

View from the E of a plinth (NT 15810 82483) that was originally situated close to the E wall of the Engine House
View from the E of a plinth (NT 15810 82483) that was originally situated close to the E wall of the Engine HouseClose-up from the E of a plinth (NT 15810 82483) that was originally situated close to the E wall of the Engine House View from the E of the large plinth with the central gutter (NT 15807 82482)A view from the E of the large plinth with the central gutter (NT 15807 82482)View from the N of the large plinth with the central gutter (NT 15807 82482)A shallow circular depression in the central gutter at the E end of the large plinth (NT 15807 82482)A view from the E showing the relationship between two of the plinths (NT 15807 82482; NT 15810 82483)View from the E of the large plinth (NT 15810 82476) situated close to the S wall at the SSW corner of the Engine House View from the W of the E end of the large plinth (NT 15810 82476) situated close to the S wall at the SSW corner of the Engine House View from the E of the large plinth (NT 15810 82476) situated close to the S wall at the SSW corner of the Engine House, showing the slot cut into its E edge Close-up of the slot cut into the E edge of the large plinth (NT 15810 82476) situated close to the S wall at the SSW corner of the Engine House

References