 |
On-line Digital Images |
SC 2626144 |
Drum Room: view from E at lower level down centre of Drum Room between the two rows of 12 rim-gear-driven maltings drums, also showing Crofts (Engineers) of Bradford gear boxes. The Drums were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company) |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626145 |
Interior view from NE of hot malt bins, situated at top level of E end of Steep Room (above Drum Room) |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626146 |
Steep Room: interior general view from E showing 24 cylindrical steel steeps (Nos. 1 and 2 in foreground), each with conical bases. The view also shows conveying equipment and water pipes above, and each steep feeds into drums below. The steeps were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company) |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626147 |
Steep Room: interior view from E showing 24 cylindrical steel steeps (Nos. 1 and 2 in foreground), each with conical bases. The view also shows conveying equipment and water pipes above, and each steep feeds into drums below. The steeps were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company) |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626148 |
Steep Room: interior oblique view from SE of steeps. The view also shows conveying equipment and water pipes above, and each steep feeds through a conical base into drums below. The steeps were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company) |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626149 |
Steep Room: interior view from E into Steep No.1, showing recently steeped barley, and odd-numbered steeping vessels in background |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626150 |
Steep Room: detailed view of Steep No.7, the foam indicating that pressurised aeration is in progress |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626151 |
Drum Room: general interior view E down centre of Drum Room, showing conical bases of 24 steeps above, and 24 rotating maltings drums (with rim gears) below. Also visible at this level are electrical control panels on either side |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626152 |
Drum Room: general interior view E down centre of Drum Room, showing conical bases of 24 steeps above, and 24 rotating maltings drums (with rim gears) below. Also visible at this level are electrical control panels on either side |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626153 |
Drum Room: interior view from E down S side of Drum Room, showing electrical control panels (left), conical bases of steeps (above), and rotating drums below |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626154 |
Drum Room: general interior view from ESE of odd-numbered rotating maltings drums |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626155 |
Drum Room: general interior view from ESE of odd-numbered rotating maltings drums |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626156 |
Drum Room: view from E along gantry at middle level of S side of Drum Room |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626157 |
Kilns: view from W looking into Kiln No.4, showing its wire-mesh floor in tilted position, allowing dried malt to fall into conveyors below |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626158 |
Kilns: view from W looking into empty Kiln No.3, showing explosed steel mesh floors, the two halves of which tip downwards at the centre to allow the emptying of the kiln (see C77070) |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626159 |
Kilns: view from N at level beneath kiln floors, showing access doors to Kilns 2 and 3 (left), and the base of the malt bins (right). The kilns are fired by oil burners directly, but two have a steam-heated indirect heat facility |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626160 |
Drum Room: view from E at lower level down S side of Drum Room showing roller bearings |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626161 |
Drum Room: detailed view from NE of Drum No.1 (of 24), showing rim gear, Crofts (Engineers) of Bradford gearboxes, and roller bearings. The drums were made by Robert Boby Ltd of Bury St Edmonds (a Vickers Ltd company) |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626162 |
Console Room: view from SE of main control panel, with barley lorry outside (backround) waiting to unload. The Console Room is situated at the ground floor level of the adjacent Silo Block (to the SW), and the control panel was manufactured by 'Electric Construction' |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626163 |
Console Room: view from SE of main control panel, with barley lorry outside (backround) waiting to unload. The Console Room is situated at the ground floor level of the adjacent Silo Block (to the SW), and the control panel was manufactured by 'Electric Construction' |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626164 |
Kilns: Detail of portable 'Redler Bulk Thrower', made by Redler Conveyors Ltd, Dunbridge Works, Stroud, Gloucestershire. It is used to load the kilns with malt from the malting drums |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626165 |
Kilns: detail of Hamworthy (of Poole, Dorset) oil burner heating Kiln No.2 (which burns heavy fuel oil) |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626166 |
Kilns: detail of supplementary peat-burning firebox of Kiln No.2 |
7/3/1996 |
Item Level |
 |
On-line Digital Images |
SC 2626167 |
Steep Room: detail of Steep No.24 as it empties into drum below |
7/3/1996 |
Item Level |
