Accessibility

Font Size

100% 150% 200%

Background Colour

Default Contrast
Close Reset

Aberdeen, York Place, Hall Russell Shipyard

Filter

No Available Filters

Save Search

Log in to save your search
Aberdeen, York Place, Hall Russell Shipyard.
General view from South-East along York Street, from E-S-E.
 compare
Aberdeen, York Place, Hall Russell Shipyard.
General view from West of dry dock gate.
 compare
Aberdeen, York Place, Hall Russell Shipyard.
General view from North of quayside crane on West side of building hall. Crane was made by Sir William Arrol and company of Glasgow in 1930. (SWL 65 tons at 75 ft radius, 45 tons at 84 ft radius).
 compare
Aberdeen, York Place, Hall Russell Shipyard.
General view from South of No.1 bay of plater's shop. To left is large profile flame cutter made by Hancock and Co. of Slough, England. (Overall length 32m and 12m wide, with four burners).
 compare
Aberdeen, York Place, Hall Russell Shipyard.
Detail of slipway carriage head pulleys and cable anchors (pulleys are 1.22m diameter).
 compare
Aberdeen, York Place, Hall Russell Shipyard.
North end of East bay in former engine works. Detail of cone-pulley drive and back gears for lathe.
 compare
Aberdeen harbour, oblique aerial view.
 compare
Aberdeen, York Place, Hall Russell Shipyard.
General interior view from North on top floor of joiners' shop, showing the concrete-framed structure of the building.
 compare
Aberdeen, York Place, Hall Russell Shipyard.
Detail of slipway winch operator's switch. On left side of switch is hand wheel for winch brake.
 compare
Aberdeen, York Place, Hall Russell Shipyard.
View in slipway winch house of rotary converter used for DC electricity supply for equipment in yard.
 compare
Oblique aerial view of Aberdeen city centre.
 compare
Aberdeen, York Place, Hall Russell Shipyard.
View from South-West of slipway winch drive gears and cable drum. (Small winch on left side used to pull empty slipway carriage down the slip).
 compare
Aberdeen, York Place, Hall Russell Shipyard.
Detail of large drive gear arm flanges and tooth shape on slipway winch drive gear.
 compare
Hall, Russell and Co. Shipyard and Engineering Works, York Street, Footdee, Aberdeen.  Oblique aerial photograph taken facing north.
 compare
Hall, Russell and Co. Shipyard and Engineering Works, York Street, Footdee, Aberdeen.  Oblique aerial photograph taken facing north.
 compare
Aberdeen, Harbour and City Centre.
 compare
Aberdeen, Hall Russell Shipyard.
Copy of Elevation, details (1.5in=1ft), sections (0.5in=1ft)
Insc:'600 Ton Slipway Carriage'
annotated 'sheet 6 of 8'
See MS/744/11, DC 27279, DC27279-80, DC27282
 compare
Aberdeen, York Place, Hall Russell Shipyard.
General view from West of former engine works-shop.
 compare
Aberdeen, York Place, Hall Russell Shipyard.
General view from West along York Street. On left is former office and apprentice training school, fabrication bays No.3, 3a, 4, 4a and the blacksmith's training school.
 compare
Aberdeen, York Place, Hall Russell Shipyard.
General view from South-West of dry dock (70 ft wide by 370 ft long).
 compare
Aberdeen, York Place, Hall Russell Shipyard.
View in compressor room, located on the East side of No.4 bay of platers' sheds. (3 Bellis Morcom Typr BM 42 'V' - block air compressors - WP 100 PSIG. Partially in view on left is one of two air receivers, 1.2 diameter, and 2.7m long).
 compare
Aberdeen, York Place, Hall Russell Shipyard.
Detail of main slipway winch drive motor (125hp).
 compare
Aberdeen, York Place, Hall Russell Shipyard.
Detail of outlets for dry dock pumps. The two large pipes on left of discharging pipe are from the main pumps (pipes 0.53m diameter). The pipe in use is from an automatic seepage pump.
 compare
Aberdeen, York Place, Hall Russell Shipyard.
Detail of one of two electrically powered capstans located at mouth of dry dock. (Thomas Reid and Sons, Linwood).
 compare