Accessibility

Font Size

100% 150% 200%

Background Colour

Default Contrast
Close Reset

Engineering heritage: Scotland - Highlands and Islands

Date 2007

Event ID 962604

Category Descriptive Accounts

Type Publication Account

Permalink http://canmore.org.uk/event/962604

(Institute Civil Engineers Historic Engineering Works no. HEW 2541)

This bridge carries the A894 road over the entrance to the sea inlet Loch a’ Chairn Bhaine and was completed in 1984. It is a bold and elegant design of three spans in prestressed and reinforced concrete although the geometry of the bridge is such that the three spans are sometimes read as five. The deck is a box girder of constant depth.

The main span is 433 ft and the side spans are 236 ft. The deck is curved in plan and continuous throughout, with movement bearings only at the abutments where they can be easily inspected and renewed if necessary.

The waterway at the bridge is nearly 400 ft with strong tidal currents and is of considerable depth. Because of this the bridge was built without temporary supports in the channel by means of cantilevering from the ends. The foundations of the V-shaped main supports are on rock and on dry land. The central section of the bridge was planned by the contractor to be pre-cast on the shore, floated out, and then lifted into position.

The consulting engineers were Ove Arup and Partners, and the main contractor, Morrison Construction Ltd. The tender price was £234 million although, because of extremely adverse weather conditions, the out-turn price exceeded £4 million. Construction was achieved within the contract period of 102 weeks.

R Paxton and J Shipway, 2007.

Reproduced from 'Civil Engineering heritage: Scotland - Highlands and Islands' with kind permission from Thomas Telford Publishers.

People and Organisations

References