Field Visit

Date October 1981

Event ID 614848

Category Recording

Type Field Visit

Permalink http://canmore.org.uk/event/614848

This is a random rubble (flag) built mill complex incorporating two, three-storey kilns and grain mill and a two-storey threshing mill and byre with hay loft. The byre with hay loft range has a flag stone roof, the rest of the mill being roofed in slate. The enclosed waterwheel operating the now gone (probable) three millstones was on the W side of the building. It was an overshot type with a maximum diameter of 4.6m and a maximum width of 1.25m. The now filled-in pit of a second enclosed wheel is situated between the grain milling area on the W and the threshing mill area on the E of the complex. This waterwheel, of the undershot type, probably drove the threshing machinery and measured 3.6m in diameter and 1.4m in width.

The kilns were housed in the S range, the southernmost being an addition (indicated by differences in the masonry).The framework for the (now gone) kiln plates is still in place indicating that they were 0.3m square. There is a date stone in the floor of the grain milling area (first floor) bearing initials and the date '1889'.

The lade is constructed from stone and measures 1.06m in width and 0.33m in depth. The sides of the trough are 5cm in width and 1 cm in thickness and are bolted to the base of the trough. There are the remains of a hinge where the two arms of the lade bifurcate, allowing the flow of water to be directed to either of the two waterwheels. A sluice was noted some 20m N of the hinge.

The present day layout of the complex is depicted on the 1st edition of the OS 25-inch map (Orkney, 1880, sheet CVII.12) with the exception of the non-enclosure of the waterwheel that probably drove the threshing mill. By 1902, this waterwheel had been enclosed (OS 25-inch map, Orkney, 1902, sheet CVII.12).

Visited by the Scottish Industrial Archaeology Survey (GJD), 24 October 1981.

See NMRS MS/500/35/29 for details